Introducing our new range of Tilt/Slide Trays. Each Tilt Tray is designed, installed and manufactured to specific client requirements and Australian Standards.
General Carrier/Tray Specifications:
- Tilt/Slide Steel Truck Body to suit IVECO ML160E28P– 9 meters
- 5mm Hardox Steel Floor – with non-slip tray protection
- Laser cut 10mm Domex plate Side combined rails.
- UHMWPE (Ultrahigh Molecular Weight Polyethylene)
- Recessed 15000lb winch,
- 2 x sunken toolboxes into floor
- PTO & Pump Fitted
- Chain Key Holes Along Tray Floor.
- An open “A” frame for lights, top and down the sides not headboard
- L.E.D tail lights. & Work lights.
- 50mm Tow Ball – mounted above winch on headboard d.
- Hydraulic Winch – 15, 0000 lb. Powered by Dan Foss.
- Counterbalance Safety Valve – installed on all hydraulic cylinders.
- HQ Paint 2 pack – (Tray color as indicated by the customer)
- Reinforced tray lock down Key hole tie down 850 mm apart (Keyhole Wheel lock clamp kit on tray, full length of tray )
- Caravan tow ball fitted an “A” frame (REMOVALBLE)
- Cable Tensioner for wire rope on winch, 30 meters
- Plastic Water tank with soap dispenser mounted to chassis/toolbox Aluminum loading ramps, 1.7m long, with locating holes in tray and fitment to top of toolbox
- Radio Remote Control For Winch – tilt and slide and 6 functions complete with transmitter.
- Quick Lashes Tie Down Straps x 2
- Hydraulic Stabilizer Legs x 2
- Container Pins x 4 Twist Locks rear to be removable, front locators. Front twist locks to be 2mm higher than the rollers
- 4 rollers inserted into floor with skid plates in between
- Auto Idle Up On Lever Activation
- Plastic mudguards kit
- Towmate (PLC56AC 56″ Power-Link LED Light)
- Chassis Mounted Tool Box – water proof and lockable X3 1000 x 800 x 500 powder coated to truck color. -(Black) 300mm deep shelve inside. With an edge
- Removable and adjustable reece hitch system.
- Tow hitch to be level with back of tray 6 Ton, manual locking pins
- weld nut into tray floor approx. 500mm back from the back of tray to suit supplied 5th wheeler connection and fabricate storage for the frame
- Container Pusher that slots into tray, 2 positions, diverts hydraulics from winch
- Removable “A” frame with 50mm ball above winch to be pinned like a like a reece hitch with holes in floor storage inside A frame.
- Hydraulic oil tank with filters Standard
- Trailer Plug 12 and 24v,
- Removable tow bar tongue , manual lock in closed position Electric Brakes for towing
Should you have any queries, please do not hesitate to contact on